This site uses cookies to provide and improve your shopping experience.
If you want to benefit from this improved service, please opt-in. Cookies Page.
DEA LOOK Electromechanical operator for swing gates up to 5 meters
The LOOK automation for swing gates moves leaves up to 5 metres in length (with a maximum weight of 280 kg).
LOOK operator has a new design. Stainless steel telescopic piston guarantees high resistance against corrosion. It's for usage on doors that open 110°. Optional encoder version guarantees high performance and safety in movement. In case of power failure unlock device with plastic key. There are 2 lengths available: with 320mm shaft for gates up to 3m long and with 520mm stem for gates up to 5m in length. Rod cover (see bellow) needs to be acquired separately to protect the telescopic rod and give a more linear aesthetic.
• With limit switches, for leafs up to 5m length
All models have: adjustable fixing plates to be screwed included (art. MLS/SFR), rod cover not included
Control board to complete the installation: control board NET230N/C (with box) or NET24N/C (with box)
SPECIFICATIONS
TECHNICAL INFO
351/SC - 351EN/SC
355/SC - 355EN/SC
371/SC - 372/SC
373/SC - 374/SC
Motor power supply (V)
230V ~ ± 10 % (50/60 Hz)
24V
Maximum power absorption (W)
300
60
Max thrust (N)
1650
1000
Time with total stroke (s)
20
33
21
34
90° Opening time (s)*
16
12,5
15
Duty cycle (cycles/hours)
22 - 25 (vers. 351EN)
40
N. max cycles in 24h.
110
Built-in capacitor (ÎĽF)
8
/
Operating temperature (°C)
-20 Ă· 50
Motor thermal protection (°C)
150
/
Weight with packing (Kg)
9
9,5
9
Sound pressure (dBA)
< 70
Protection level
IP24
*the opening time of the leaf at 90° may be lower accordingly to the geometry of the installation
NOTE:
See product brochure in manual for additional information
Please see the table above for information on the options for the arms for these operators, there are many options, such as gate leaf size and built-in end stops to stop the gate at either end of its travel without the need for stops in the ground. We can make up double or single kits with any of these arm options. Please call the office for discounts on these and to specify the correct arms in the kit. 01564 731035
We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.
Code:
Delivery and Returns Policy
Arden Gate Automation
At Arden Gate Automation, we are committed to delivering your orders efficiently and affordably. Our shipping policy is designed to provide you with the best service possible, no matter where you are located.
Delivery Policy
Standard Shipping Charges:
For UK Mainland orders a charge of £12.50 + VAT is applied per consignment.
Non UK Mainland Shipping:
For orders shipped outside the UK mainland, a shipping fee of £30 plus VAT is charged.
Special Shipping Charges for Heavy or Large Items:
Certain products in our range that are either too heavy or too large will have their own shipping prices. This will be clearly indicated on the product page and during the checkout process.
Delivery Times
We strive to process and dispatch your order as quickly as possible. with all orders received before 2pm shipped on a next day service*, This is not guaranteed. Standard delivery times within the UK are 3-5 business days. Non UK Mainland delivery times may vary.
Returns Policy
Returns:
*Please note there is a 15% restocking charge for all returns*
If you are not completely satisfied with your purchase, you may return it to us within 30 days of receipt. The item must be in its original condition and packaging.
Refunds:
*Please note there is a 15% restocking charge for all returns*
Once your return is received and inspected, we will send you an email to notify you of the approval or rejection of your refund.
If approved, your refund will be processed, and a credit will automatically be applied to your original method of payment, within a certain number of days.
Exchanges:
We only replace items if they are defective or damaged. If you need to exchange it for the same item, please contact our customer service.
Return Shipping:
*Please note there is a 15% restocking charge for all returns*
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable.
If you receive a refund, the cost of return shipping will be deducted from your refund.
Contact Us
For more information about our delivery and returns policy, please contact our customer service team. We are here to help!
All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.
Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so.
